ZENITH ZTHY110/220 Series Hybrid Inverter (8.5K–12K)
The ZENITH ZTHY110/220 Series Hybrid Inverter features a modern exterior design and advanced digital control technology for efficient and reliable power management. Equipped with an OLED light-touch screen, the inverter provides a clear display of operating information, enabling convenient monitoring and responsive control. Its dual-channel MPPT technology and maximum efficiency exceeding 95% support effective solar energy conversion.
Designed with an improved heat dissipation system and comprehensive hardware and software protection mechanisms, the ZTHY110/220 Series aims to enhance equipment durability, reliability, and service life. It supports lead-acid and lithium batteries, with model-dependent charging capacity and output configurations. Its flexible monitoring modes and integrated safety features make it suitable for residential and other solar power applications.
Product Specifications
- Product Series: ZTHY110/220 Series
- Model Options: 48V 10KW, 48V 12KW
- Rated AC Capacity: 120 (L1/N, L2/N) / 240 VAC (L1/L2)
- Input Phase Voltage Range: 85–140 VAC ± 2%
- Maximum Efficiency: Greater than 95%
- Nominal Output Power:
- 48V 10KW: Split phase: 10,000 VA / 10,000 W; single phase: 7,200 VA / 7,200 W
- 48V 12KW: Split phase: 12,000 VA / 12,000 W; single phase: 7,200 VA / 7,200 W
- Output is limited by the wiring terminals.
- Nominal Output Voltage: 120 VAC (L1/N, L2/N) / 240 VAC (L1/L2)
- Maximum Bypass Phase Overload Current: 2P 63 A / 63 A (L1/L2)
- Overload Protection:
- At 102% to below 110% load: reports an error and turns off the output after 5 minutes.
- At 110% to below 125% load: reports an error and turns off the output after 10 seconds.
- Above 125% load: reports an error and turns off the output after 5 seconds.
- Battery Compatibility: Lead-acid or lithium battery
- Maximum Configurable Charging Current:
- 48V 10KW: 120 A
- 48V 12KW: 160 A
- Maximum PV Open-Circuit Voltage: 6,000 W × 2 / 22 A × 2, as stated in the source
- Protection Rating: IP21
- Safety Certification: UL STD.1741
- Dimensions (H × W × D): 620 × 450 × 132 mm, without hanger
Key Features
- Dual-Channel MPPT: Supports solar input management through two MPPT channels.
- High Efficiency: Maximum efficiency exceeding 95%.
- OLED Touch Screen: Provides a high-definition operating display with touch controls.
- Responsive Operation: Designed for accurate touch input and quick response.
- Flexible Monitoring: Supports different monitoring modes.
- Enhanced Protection: Incorporates hardware and software protection mechanisms.
- Improved Heat Dissipation: Designed to support reliable operation and extend equipment service life.
ZENITH ZTHY110/220 Series Hybrid Inverter (8.5K–12K)
The ZENITH ZTHY110/220 Series Hybrid Inverter features a modern exterior design and advanced digital control technology for efficient and reliable power management. Equipped with an OLED light-touch screen, the inverter provides a clear display of operating information, enabling convenient monitoring and responsive control. Its dual-channel MPPT technology and maximum efficiency exceeding 95% support effective solar energy conversion.
Designed with an improved heat dissipation system and comprehensive hardware and software protection mechanisms, the ZTHY110/220 Series aims to enhance equipment durability, reliability, and service life. It supports lead-acid and lithium batteries, with model-dependent charging capacity and output configurations. Its flexible monitoring modes and integrated safety features make it suitable for residential and other solar power applications.
Product Specifications
- Product Series: ZTHY110/220 Series
- Model Options: 48V 10KW, 48V 12KW
- Rated AC Capacity: 120 (L1/N, L2/N) / 240 VAC (L1/L2)
- Input Phase Voltage Range: 85–140 VAC ± 2%
- Maximum Efficiency: Greater than 95%
- Nominal Output Power:
- 48V 10KW: Split phase: 10,000 VA / 10,000 W; single phase: 7,200 VA / 7,200 W
- 48V 12KW: Split phase: 12,000 VA / 12,000 W; single phase: 7,200 VA / 7,200 W
- Output is limited by the wiring terminals.
- Nominal Output Voltage: 120 VAC (L1/N, L2/N) / 240 VAC (L1/L2)
- Maximum Bypass Phase Overload Current: 2P 63 A / 63 A (L1/L2)
- Overload Protection:
- At 102% to below 110% load: reports an error and turns off the output after 5 minutes.
- At 110% to below 125% load: reports an error and turns off the output after 10 seconds.
- Above 125% load: reports an error and turns off the output after 5 seconds.
- Battery Compatibility: Lead-acid or lithium battery
- Maximum Configurable Charging Current:
- 48V 10KW: 120 A
- 48V 12KW: 160 A
- Maximum PV Open-Circuit Voltage: 6,000 W × 2 / 22 A × 2, as stated in the source
- Protection Rating: IP21
- Safety Certification: UL STD.1741
- Dimensions (H × W × D): 620 × 450 × 132 mm, without hanger
Key Features
- Dual-Channel MPPT: Supports solar input management through two MPPT channels.
- High Efficiency: Maximum efficiency exceeding 95%.
- OLED Touch Screen: Provides a high-definition operating display with touch controls.
- Responsive Operation: Designed for accurate touch input and quick response.
- Flexible Monitoring: Supports different monitoring modes.
- Enhanced Protection: Incorporates hardware and software protection mechanisms.
- Improved Heat Dissipation: Designed to support reliable operation and extend equipment service life.
